Works Very Well, Good Customer Service From Ecomfort Feb 16, 2016

I installed the indoor and outdoor units myself including all the electrical work. Initially I installed GFCI circuit breaker per Daikin's installation manual, but it tripped every time the compressor cycled on. I replaced it with regular 20A, 220V, single-phase circuit breaker and it's worked fine ever since. I had a certified HVAC tech install the line sets and test for leaks.

Kiss "keep It Simple Stup**" Sep 29, 2016

OK, first thing to do is to consider the space, (including walls and doors) you are trying to condition. Envision the air flow between where the air will eventually come in and where it will be exhausted once you install the ductwork. Lastly, based on the inlet and exhaust locations, figure out where you want to position the unit you are going to use. Now there are lot's of installation tips an experienced professional can offer you while going through this process, but common sense and a... more

Great For Woodshops Sep 14, 2016

I have a 14 X 40 wood shop and was looking for something to heat/cool it that wouldn't cost a lot of money and also not run my electric bill through the roof. I think this unit is the answer. It was simple to install with no labor costs and it runs quiet and efficient. It keeps the shop comfortable with low humidity great for cast iron tables. We placed it about 5" off the floor on the lower end of the building away from busy working spots and also dust. The building has R23 insulation... more

Fantech Vhr - 159 Cfm - Heat Recovery Ventilator (hrv) - Top Ports - 6" Duct - Recirculation Review Sep 15, 2016

Great for high humidity pet room ventilation. I bought this unit to improve the air quality in my pet room that contains a 600 gallon aquarium and 200 more gallons in the sump bringing the total volume up to 800 gallons. Needless to say humidity was a problem in this 14' x 14' room. My room has a split ducted a/c unit set to 84 degrees and did have a dehumidifier. These would work together to control the temp and humidity in the room but was using a lot of power to do so. Problem was much... more

Very Good Product Feb 24, 2016

once we got it working it great.