Kiss "keep It Simple Stup**" Sep 18, 2016

OK, first thing to do is to consider the space, (including walls and doors) you are trying to condition. Envision the air flow between where the air will eventually come in and where it will be exhausted once you install the ductwork. Lastly, based on the inlet and exhaust locations, figure out where you want to position the unit you are going to use. Now there are lot's of installation tips an experienced professional can offer you while going through this process, but common sense and a... more

Reznor Udap 200 Sep 13, 2016

I just want to say I bought these two units from eComfort they made it so easy to purchase, fast shipping and they work great thank you. I would recommend them to anybody and I will purchase from these people again.

Nice Choice Oct 27, 2016

The radiators went together very easily with the connections provided to the heating pex and there were no leaks. very easy to bleed. they provide much more heat than I was getting from my old wall convectors and seem to retain the heat a long time after the boiler is off. Not hard to hang either as long as you separate the hanger prongs in increments of 1/2 inch. Also, my wife was pleasantly surprised by the appearance

Love Is Fantech Aug 16, 2016

I used this inline fan to hook up to my vent hood in my kitchen. Even though this product was assembled in America, the motor was made in Germany and you certainly can't go wrong with German technology. I also brought LD10 silencer to attach directly to the fan and placed the silencer between the vent hood and the fan. I also purchased the FC10 clamp to hold the silencer and fan in place. I find the clamp itself was not good enough to hold fan and the silencer. To give me a piece of mind,... more

Use Vibration Dampening Nov 04, 2016

I finally got this installed and working. I like the copper heat exchanger and the compact size. I mounted the first one to concrete walls to avoid vibration above. It took some adjusting to get the louvers to stop vibrating and making noise. It looks like a slick little heater and I expect it will last longer than me. The only down side is the vibration from the fan. I'll have to cut the pipe and put in some vibration dampening. It carries the vibration through the pipes into the hangers... more