Product Excellence Sep 25, 2016

This is my 4th Mitsubishi system going in. Superbly QUIET, super efficient, and reliable. I saved a fortune on heating and cooling bills over the years with my 3 systems, this completes the house. Easy to install, well made. Mini Splits are the way to go. Mitsubishi is the king of the hill, in SEER, reliable, features and function, each generation gets better and better. Highly recommended to heat and cool. QUIET, RELIABLE SUPER EFFICIENT

Exciting Product So Far!! Mar 10, 2016

I have built a greenhouse and installed this boiler into the benches to heat the propagation soil and to a unit heater. I decided on hydronic, but knew nothing about its operation or how it really worked. I did my research and, with the help of ecomfort, electro industries, and other online resources, now have a great system in place. My seed propagation table is regulated at 80-85 degrees and my greenhouse stays warm at 68 degrees. The side benefit is the total lack of noise from the... more

Warmwire Heated Floor Jun 03, 2016

I installed a WarmWire heated floor in a 6'x8' coat room that had no other source of heat. It is on a concrete slab with 2 outside walls and a wall to an unheated attached garage. I glued 2 6mm thick sheets of Cerazorb synthetic cork directly on the concrete. It was super easy to lay the wire on top on the cork using the metal clip system provided. To be safe, I laid a sheet of 1/4" luan plywood on top of the wires while laying the tile. I checked the resistance in the wires at each step... more

Just Not Happy Jun 06, 2016

I would like to be able to give a good report, but the truth is during just the second winter I used this product it stopped working. I tried to relight it but as soon as I let of the pilot button the pilot goes out. I removed the thermocouple which senses the pilot flame and locks the gas valve on so the thermostat can control the burner. I was told if you sand it off it can restore its function. But that did not fix the problem and the pilot won't stay lit. I have to conclude that the... more

Nice Panel Radiator Oct 07, 2016

I just wish it was more simple to figure out which connectors were needed. The description should be simpler. All I wanted was 1/2" copper connections but somehow the unit showed up with PEX connections. Overall good radiator though.